The CME 75 is a truck mounted rig, equipped with side -to- side slide base feature, two speed “feed up” and has a 3L8 moyno pump mounted on the side of the truck. This machine is set for any drilling situation encountered and dominates every soil condition, or rock type that it drills. It can drill solid stem and hollow stem augers as well as rock core, wash bore, tri cone and perform DTHH with our air compressor. A 4300 International kept in great condition is the carrier vehicle and is suited for the drill representing its extreme power and weight.
Features – Geotechnical Drilling / Environmental Drilling / Exploration Drilling / Geo-thermal Drilling
| CME 75 Drill Rig | |
| Stroke | 72 in. |
| Weight | 10,000 lb. |
| Width | 8 ft – 6in. |
| Length (tower down) | 24ft – 6in. |
| Height (tower down) | 11ft – 4in. |
| Height (tower up) | 31ft – 4in. |
| Down Force | 20,000 lbs |
| Retraction Force | 30,000 lbs |
| Engine (gas) | Ford, straight 6-cylinder |
| Augerhead Specs | |
| Torque | 10, 191 ft. lb. |
| Rotation | 727 rpm |
| Hex adapter | 1-5/8 in |
| CME Auto Hammer | |
| Hammer Weight | 140 lbs. |
| Hammer Drop | 32 in. |
| Hammer Drop Rate | 60 / minute |