The CME 55 track mounted machine has a compact foot print and low centre of gravity, which allows it to navigate through difficult terrain. Powering through thick forest, deep swamp, or all terrain locations Determination Drilling will get to those off road holes you need.
This rig is equipped with the 3L8 moyno pump with discharge lines setup to a flow through swivel on its feed box. It is able to drill solid stem and hollow stem augers as well as rock core, wash bore, tri cone and DTHH drilling.
Features – Geotechnical Drilling / Environmental Drilling / Exploration Drilling
| CME 55 Drill Rig | |
| Stroke | 72 in. |
| Weight | 8,000 lb. |
| Width | 8 ft – 6in. |
| Length (tower down) | 21ft – 6in. |
| Height (tower down) | 8ft – 4in. |
| Height (tower up) | 26ft – 4in. |
| Down Force | 18,650 lbs |
| Retraction Force | 28,275 lbs |
| Engine (gas) | Ford, straight 6-cylinder |
| Augerhead Specs | |
| Torque | 7, 333 ft. lb. |
| Hex adapter | 1-5/8 in |
| Rotation | 690 rpm |
| CME Auto Hammer | |
| Hammer Weight | 140. lbs. |
| Hammer Drop | 32″ |
| Hammer Drop Rate | 60 / minute |